Submissions

Online Submissions

Already have a Username/Password for Indonesian Fisheries Research Journal?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

SEND INSTRUCTIONS FOR WRITING AND PUBLISHING ARTICLES OF INDONESIAN FISHERIES RESEARCH JOURNAL 2016 (12pt Bold)

Ngurah N. Wiadnyana1), Hari Eko Irianto1), Husnah1), Gadis Sri Haryani2), M.F. Rahardjo3), Sugeng Hari Wisudo3) (12pt Bold)

1Pusat Penelitian dan Pengembangan Perikanan, Jakarta      

2Pusat Penelitian Limnologi-LIPIa

3Fakutas Perikanan dan Ilmu Kelautan, Institut Pertanian Bogor (10pt Normal Italic)

ABSTRACT (12pt Bold)

This is a new author guidelines and article template of Indonesian Fisheries Research Journal since year 2016 publication. Article should be started by Title of Article followed by Authors Name and Affiliation Address and abstract. This abstract section should be typed in Italic font and font size of 10 pt and number of words of 150-250. Special for the abstract section, please use left margin of 3 cm, right margin of 2.5 cm, right margin of 2.5 cm and bottom margin of 2.5 cm. The single spacing should be used between lines in this article. If article is written in Indonesian, the abstract should be typed in Indonesian and English. Meanwhile, if article is written in English, the abstract should be typed in English only. The abstract should be typed as concise as possible and should be composed of: problem statement, method, scientific finding results, and short conclusion. The abstract should only be typed in one paragraph and one-column format.

KEYWORDS: Author guidelines; Indonesian fisheries; research journal; article template

1. Introduction

Indonesian Fisheries Research Journal has a p-ISSN 0853-8980; e-ISSN 2502-6569 with Accreditation Number: 704/AU3/P2MI-LIPI/10/2015 (period October 2015 - October 2018). First edition was published in 1994 with a single number. Since 2005, the publishing frequency is twice a year, in June and December (http://ejournal-balitbang.kkp.go.id/index.php/ifrj). The peer-reviewed Indonesian Fisheries Research Journal accepts manuscripts or articles in the field of fish resources, oceanography and Limnology for fisheries, fisheries biology andmanagement, socio-economic and enhancement, resource utilization, aquaculture, post-harvest of marine, coastal and inland waters.

Manuscripts are submitted in Indonesian Fisheries Research Journal will be checked in term of writing guideline. When it is appropriate the manuscript will be reviewed by two Evaluators designated by the Chairman of the Editorial Board. Manuscript received will be examined for the plagiation element using Google Scholar network. This journal only accept articles that come from the results of original research (top priority), and articles reviewing recent scientific natures (non-priority) (Bekkeret al., 1999; Bezuidenhoutet al., 2009). Decision for admissibility or non admissibility of the manuscript published in this journal is the rights of the Chairman of the Editorial Board based on the recommendations of the evaluators (Bhaktavatsalam & Choudhury, 1995).

2. Writing Title, Name and Author Address

The title of manuscript, author name (without academic degrees), and the affiliations address of author (s) are written centered on the first page under the title of the manuscript. The distance between the line between the title and the author's name is two spaces, while the distance between the address of author affiliations and the abstract is one space. Keywords should be written below the text of the abstract for each language, arranged in alphabetical order and separated by a semicolon with the number of 3-5 words.

Responsible author or Corresponding Author should be marked with an asterisk followed by a comma "1)" in the above example. At the bottom of the left column of the first page/abstract should be written sign the Responsible author or Corresponding Author and well written the email address (see example). Communication on the revision of the manuscript and the final decision will only be communicated via email the Author Contact.

If the authors of more than one, please write down the names of the authorswith separated by a comma (,). If the author's name consists of two words, said first author (first name) should not be abbreviated. If the author's name consists of only one word, write the actual name in one word, however, in the online version (HTML) will be written in two words that contain the same name (repeatedly) for the purposes of indexing the metadata (Camdali&Tunc , 2006; Fridman , 2008).

3. General Intruction to Writing Manuscript

Manuscripts that meet the guidelines for Indonesian Fisheries Research Journal (in MS Word format, use the template of this article) must be submitted through one of the following ways:

  1. Delivery manuscript via e-mail of Indonesian Fisheries Research Journal Editorial (ifrj.puslitbangkan@gmail.com).
  2. Delivery of manuscripts to Online Submission System in the E - Journal Portal of Indonesian Fisheries Research Jounal (http://ejournal-balitbang.kkp.go.id/index.php/ifrj) after registering as a writer and/or Reviewers in the section "Register".

Article writing instructions and templates can be downloaded at the following address:

Article Writing Templates and Guidelines in MS Word (.doc): Download

Article Writing Templates and Guidelines in PDF (.pdf):Download

The intruction to submit a manuscript by online can be found on the Submit Online Instructions below. Manuscripts that are not according to the instructions to writing of Indonesian Fisheries Research Journal will be returned to the author prior to continue the review process.

Manuscripts written must contain components of scientific articles follows (subtitles in order), namely: (a) Article Title, (b) Name of the author (without An academic title), (c) Address of Affiliates Author, (d) Abstract and Keywords, (e) Introduction, (f) Materials and Methods, (g)  Results and Discussion, (h) Conclusion, (i) Acknowledgements, and (j) References.

Writing subtitles on the contents of the article (Introduction, Materials and Methods, Results and Discussion, Conclusion) are in bold with the Title Case and structured format left without a bottom line price. Sub headings in bold format Sentence case and compiled left flat.

Manuscripts are written in English, in double-spaced typing, with the maximum number of pages to 15 pages, including figures and tables. Articles should be written in a text field size A4 (210 x 297 mm) and with a format 3 cm left margin, right margin 2.5 cm, 2.5 cm top margin and bottom margin of 2.5 cm. The manuscript must be written with the font Times New Roman 12pt font size (unless the article title, author name and title abstract), within two spaces, and in the format of the column. Scientific names are written in italics (Italic). New paragraph starting at 1 cm from the left border, while the missing spaces between paragraphs between. All numbers are written in Arabic numerals, except at the beginning of the sentence. Writing unit is using the International System of Units (SI). Examples of unit symbols abbreviations are: gram (g), liters (L), cubic meters (m3) per cubic meter (m-3).

Tables and Figures are placed in the group after the text of the referenced tables or figures. Each image must be given the title of the image (Figure Caption) on the bottom of the image and numbered in Arabic numerals followed by the title picture. Each table should be given a titled table (Table Caption) and numbered in Arabic numerals on the top of the table followed by the title of the table. The pictures should be printed clearly warranted (font size, resolution and size of the line to be sure printed clearly). Figures and tables and diagrams/schematics should be placed among the groups corresponding column of text, or if too much is placed in the middle of the page. Tables should not contain vertical lines, while the horizontal lines are allowed but only the essentials only.

4. Special Instructions Content Writing Script Manuscript

ARTICLE TITLE: The article title should be written briefly and clearly, and must pinpointing issues to be raised, does not allow its diverse interpretations, written entirely in capital letters symmetrically. Title of the article should not contain abbreviations that are not commonly used. The main ideas put forward in advance a new article is followed by other explanation.

INTRODUCTION: It should contain (in order) the general background, previous literature review (state of the art) as a basis for claiming a scientific novelty of the article, a statement of scientific novelty, and the research problem or hypothesis. At the end of the preliminary assessment purposes it should be written the article. In the scientific article format is not allowed their review of the literature as well as in the research report, but expressed in previous literature review (state of the art) to demonstrate the scientific novelty of the article.

MATERIALS AND METHODS: In Materials and Methods section it contains the main materials used in the study and the methods used in solving the problems, including methods of analysis. The materials are written here only in the form of the main materials only and must be equipped with the brand and its purity (eg: H2SO4 (Merck, 99 % )). Equipment that is written in this section only contains major appliances equipped with the brand (eg: electric Furnace (Carbolite)). The components supporting equipment need not be written. The series should be the main tool in this section is equipped with a caption. Caption placed to be part of the title of the image (figure caption) is not a part of the image. The methods used in the completion of the research written in this section.

RESULTS AND DISCUSSION: Results and Discussion must be separated. This section contains the results of research findings and scientific discussion. Please write the scientific findings (scientific finding) obtained from the results of research that has been done, but must be supported by sufficient data. Scientific findings are referred to here are not the data of the research results. These scientific findings should be explained scientifically include: What kinds of the scientific findings are obtained? Why did it happen? Why is such a variable trend? All these questions must be explained scientifically and not merely descriptive, if necessary it must be supported by the phenomena of adequate scientific basis. Furthermore, it should be explained also in comparison with the results of other researchers about the same topic. The results of the research and findings must be able to answer the research hypotheses in the introduction.

CONCLUSION: Conclusions describe the response of hypotheses and/ or purposes of research or scientific findings obtained. Conclusions not contain looping of results and discussion, but rather to a summary of the findings as expected in purpose or hypothesis. If necessary, at the end of the conclusion it can be also written things that will be associated with further ideas from the research.

ACKNOWLEDGEMENTS: Acknowledgements are mainly addressed to research funders or donors. Acknowledgements can also be delivered to the Parties that support the implementation of research.

REFERENCES: All references referred to in the text of the article must be listed at the References cited at least 25 titles. The refererences cited that comes from his own are a maximum of 5 articles. References should derived from primary sources (scientific journals and amounted to a minimum of 80 % of the total bibliography) published in last 10 (ten) years.

5. Equations Writing Guidance

Each equation is written centered with numbered columns written in parentheses and placed at the end of the right margin. Equations should be written using Equation Editor in MS Word or Open Office (Primack , 1983).

6. Writing Citations /References In Text Articles

Each dataretrieval or quoted from other references, the author must write the reference source. References or citations are written in the description/text by the author's name and the year (Irwan& Salim, 1998). If the author of more than two, then just write the name of the first author followed by "et al." (Bezuidenhout et al., 2009; Roeva, 2012). All referenced in the text must be listed in the References section, and vice versa, all that is written in the References should be cited in the text (Wang et al., 2011).

7. Writing Reference Cited

Writing the references cited in Indonesian Fisheries Research Journal is in accordance with the format 6th Edition APA (American Psychological Association). Download

References in the form of scientific journals:

Zulkarnaen, F., & Husnah. (2015). Identification and classification of Lake Bottom Surface and Aquatic Vegetation in Laut Tawar Lake, Aceh.Ind. Fish Res. J. 21(1), 1-8.

Sunarno, M. T. D., Wibowo, A., & Subagja. (2007). (In Indonesian). Identification of three backfeather fish group (Chitala lopis) in Tulang Bawang and Kapuas Rivers with biometric approach. J. Lit. Perikan. Ind. 13(3), 1-14.

References in the form of books:

Fridman, A. (2008). Plasma Chemistry (p. 978). Cambridge: Cambridge University Press.

References in the form of Proceedings:

Roeva, O. (2012). Real-World Applications of Genetic Algorithm. In International Conference on Chemical and Material Engineering (pp. 25–30). Semarang, Indonesia: Department of Chemical Engineering, Diponegoro University.

References in the form of Dessertation/Thesis/These:

Istadi, I. (2006). Development of A Hybrid Artificial Neural Network – Genetic Algorithm for Modelling and Optimization of Dielectric-Barrier Discharge Plasma Reactor. PhD Thesis. Universiti Teknologi Malaysia.

References in the form of Patent: 

Primack, H. S. (1983). Method of Stabilizing Polyvalent Metal Solutions. US Patent No. 4,373,104.

References in the form of HandBooks: 

Hovmand, S. (1995). Fluidized Bed Drying. In Mujumdar, A.S. (Ed.) Handbook of Industrial Drying (pp.195-248). 2nd Ed. New York: Marcel Dekker.

8. Instruction to Submit Manuscripts Online

Manuscripts should be submitted through one of the following ways:

  1. Delivering of the manuscript is preferably with Online Submission System in the E-Journal Portal Indonesian Fisheries Research Journal (http://ejournal-balitbang.kkp.go.id/index.php/ifrj).
  2. The first author is listed as author and /or Reviewers (checking role as Author and/or Reviewer) on the "Register" or address: http://ejournal-balitbang.kkp.go.id/index.php/ifrj/user/register.
  3. Once logged in as an Author, click on "New Submission". Stages submit an article consists of five stages, namely: (1) Start, (2) Upload Submission, (3) Enter Metadata, (4) Upload Supplementary Files, (5) and Confirmation.
  4. Under Start, select the Journal Section (Full Article), check all of the checklist.
  5. In the Upload Submission, please upload a manuscript file in MS Word articles in this section.
  6. In the Enter Metadata, enter data all Authors and their affiliation, followed by the title and abstract, and indexing keywords.
  7. In the Upload Supplementary Files, allowed to upload a file data to support or cover letter or other document.
  8. In the Confirmation, please click "Finish Submission" if all the information is correct.
  9. If the Authorhas difficulties in the process of submission via online system, the manuscripts can also be sent via e-mail to e-mail Editorial Indonesian Fisheries Research Journal (ifrj.puslitbangkan@gmail.com), however this method is not recommended.
  10. Statement letter can be downloaded here.

9. Conclusion

Every article that is sent to the editorial office of Indonesian Fisheries Research Journal should follow the instructions of this writing. If the article is not in accordance with this guideline, the manuscript will be sent back to the author before processed further.

10. Acknowledgements

Thanks delivered to the Center for Fisheries Research and Development, which has funded the sustainability of this journal.

11. References Cited

Bekker, J. G., Craig, I. K. & Pistorius, P. C. (1999). Modeling and Simulation of Arc Furnace Process. ISIJ International, 39(1), 23–32.

Bezuidenhout, J. J., Eksteen, J. J. & Bradshaw, S. M. (2009). Computational fluid dynamic modelling of an electric furnace used in the smelting of PGM containing concentrates. Minerals Engineering, 22(11), 995–1006.

Bhaktavatsalam, A. K. & Choudhury, R. (1995). Specific Energy Consumption in The Steel Industry. Energy, 20(12), 1247–1250.

Camdali, U. & Tunc, M. (2006). Steady State Heat Transfer of Ladle Furnace During Steel Production Process. Journal of Iron and Steel Research, International, 13(3), 18–20.

Fridman, A. (2008). Plasma Chemistry (p. 978). Cambridge: Cambridge University Press.

Hovmand, S. (1995). Fluidized Bed Drying. In Mujumdar, A.S. (Ed.) Handbook of Industrial Drying (pp.195-248). 2nd Ed. New York: Marcel Dekker.

Istadi, I. (2006). Development of A Hybrid Artificial Neural Network – Genetic Algorithm for Modelling and Optimization of Dielectric-Barrier Discharge Plasma Reactor. PhD Thesis. Universiti Teknologi Malaysia.

Primack, H. S. (1983). Method of Stabilizing Polyvalent Metal Solutions. US Patent No. 4,373,104.

Roeva, O. (2012). Real-World Applications of Genetic Algorithm. In International Conference on Chemical and Material Engineering (pp. 25–30). Semarang, Indonesia: Department of Chemical Engineering, Diponegoro University.

Wang, Z., Wang, N. H. & Li, T. (2011). Computational analysis of a twin-electrode DC submerged arc furnace for MgO crystal production. Journal of Materials Processing Technology, 211(3), 388–395.

12. Article Processing Fees

Every article that is sent to the editorial office of Indonesian Fisheries Research Journal is free of charge (free - no page charge) as well as free for articles processing. The publicationcostsare borned by this journal publishers.

 

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in Microsoft Word document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is double-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

  7. Total pages of 20, A4 Paper (210 mm x 297 mm)

  8. The title of no more than 15 words

  9. Graphics black and white, Picture or Map of can colour

  10. Margin left 3 cm, margin right 2.5 cm, margin top 2.5 cm and margin bottom 2.5 cm
 

Copyright Notice

Creative Commons License
Indonesian Fisheries Research Journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (IDR)
Authors are required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Fast-Track Review: 0.00 (IDR)
With the payment of this fee, the review, editorial decision, and author notification on this manuscript is guaranteed to take place within 4 weeks.

Article Publication: 0.00 (IDR)
If this paper is accepted for publication, you will be asked to pay an Article Publication Fee to cover publications costs.

If you do not have funds to pay such fees, you will have an opportunity to waive each fee. We do not want fees to prevent the publication of worthy work.