Submissions

Online Submissions

Already have a Username/Password for Jurnal Kebijakan Perikanan Indonesia?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

SEND INSTRUCTIONS FOR WRITING AND PUBLISHING ARTICLES OF INDONESIAN FISHERIES POLICY JOURNAL 2016 (12pt Bold)

Ali Suman 1) , Wudianto 2) , John Haluan 3) , Zahri Nasution 4) and Andin H Taryoto 5) (12pt Bold)

1 Research Institute of Marine Fisheries, Jakarta

2 Center for Fisheries Research and Development, Jakarta

3 Institut Pertanian Bogor

4 Research Center for Socio-Economic Marine and Fisheries

5 Fisheries High School, Jakarta (10pt Normal Italic)

ABSTRACT (12pt Bold)

This has led to a new format at the same template manuscripts / articles used in the article published in Indonesian Fisheries Policy Journal began publishing in 2016. The article begins with Article Title, Author Name, Address Affiliate author, followed by the abstract in italics (Italic) 150-250 words long. Especially for the Abstract, text written with the left margin of 4 cm, the right margin 3 cm, the top margin and the bottom margin of 3 cm 3 cm with 10 pt font size and the font Times New Roman and single-spaced line spacing. If the Indonesian language articles, the abstract should be written in Indonesian and English is good and right. Abstracts must contain part of the issue will be raised, the solution method, and the results obtained scientific findings and conclusions. Abstracts for each language can only be written in one paragraph alone with the format of the column.

KEYWORDS: Coding Guidelines; Journal of policy; Indonesian fisheries; template article

ABSTRACT (12pt Bold)

This is a new author guidelines and article template of Indonesian Fisheries Policy journal publication since year 2016. Article should be started by Title of Article Followed by Name Authors and Affiliation Address and abstract. This abstract section should be typed in Italic font and font size of 10 pt and number of words of 150-250. Special for the abstract section, please use the left margin of 4 cm, right margin of 3 cm, right margin of 3 cm and bottom margin of 3 cm. The single spacing between lines should be used in this article. If the article is written in Indonesian, the abstract should be typed in Indonesian and English. The abstract should be typed as a Concise as possible and should be composed of: problem statement, methods, scientific finding results, and short conclusion. The abstract should only be typed in one paragraph and one-column format.

KEYWORDS : Author guidelines; policy journal; Indonesian fisheries; article template

1 . Introduction

Indonesian Fisheries Policy Journal has a p-ISSN 1979-6366; e-ISSN 2502-6550 with Accreditation Number: 626 / AU2 / P2MI-LIPI / 03/2015 (period April 2015-April 2018). First published in 2009, with the publication frequency of twice a year, in May and November. (http://ejournal-balitbang.kkp.go.id/index.php/jkpi) is a peer-reviewed journal Fisheries Policy Indonesia accept manuscripts or articles in the field of fisheries both sea and inland public waters from various academics and researchers both nationally and internationally. The journal presents analysis and synthesis of research results, information and ideas in maritime and fisheries policies.

Scripts are entered in the Journal of Indonesian Fisheries Policy will be checked guideline writing. When it is appropriate will be reviewed by two people Evaluator based on the designation of the Chairman of the Editorial Board. Manuscript received will be examined plagiasinya element using Google Scholar. This journal only accept articles that come from the results of original research (top priority), and article reviews recent scientific nature (non-priority) (Bekker et al ., 1999; Bezuidenhout et al ., 2009). Decision admissibility of a scientific article in this journal the rights of the Chairman of the Editorial Board based on the recommendations of the evaluator (Bhaktavatsalam & Choudhury, 1995).

2. Writing Title, Name and Address Writer

The article title, author name (without academic degrees), and the address written author affiliations centered on the first page under the title of the article. The distance between the line between the title and the author's name is two spaces, while the distance between the address of author affiliations and the abstract is one space. Keywords should be written below the text of the abstract for each language, arranged in alphabetical order and separated by a semicolon with the number of words 3-5 words. For articles written in Indonesian, write the translation of the English title at the beginning of the abstract text in English (see example above).

Responsible author or authors or Corresponding Author Correspondence should be marked with an asterisk followed by a comma " 1 )" in the above example. At the bottom of the left column of the first page / abstract should be written sign Writer Writer Responsibility or correspondence or Corresponding Author and well written email address (see example). Communication on the revision of the article and the final decision will only be communicated via email Author Contact.

If the author of more than one, write down the names of the authors, separated by a comma (,). If the author's name consists of two words, said first author ( first name ) should not be abbreviated. If the author's name consists of only one word, write the actual name in one word, however, in the online version (HTML) will be written in two words that contain the same name (repeatedly) for the purposes of indexing metadata (Camdali & Tunc, 2006; Fridman, 2008).

3. General Instructions Writing Manuscript

Manuscripts already satisfies the Indonesian fisheries policy journal writing (in MS Word format, using the template of this article) must be submitted through one of the following ways:

  1. Delivery manuscript via E-mail to email Fisheries Policy Journal Editorial Indonesia (jkpi.puslitbangkan@gmail.com).
  2. Shipping manuscripts to Online Submission System in the E-Journal Portal Journal Indonesian Fisheries Policy (http://ejournal-balitbang.kkp.go.id/index.php/jkpi) after registering as a writer and / or Reviewers in the " Register " ,

Article Writing instructions and templates can be downloaded at the following address:

Article Writing Templates and Guidelines in MS Word (.doc): Download

Article Writing Templates and Guidelines in PDF (.pdf):Download

Hint submit a manuscript online can be seen at the instructions Submit Online below. Manuscripts that are not according to the instructions of writing journal Indonesian Fisheries Policy will be returned to the author prior to continue the review process.

Manuscripts written must contain components of scientific articles follows (subtitles in order), namely: (a) Article Title, (b) Name of the author (without a title), (c) Address Affiliates Writer, (d) Abstract and Keywords key, (e) Introduction, (f) Discussion, (g) Conclusions and Recommendations, (h) Acknowledgements, and (i) References.

Writing subtitles on the contents of the article (Introduction, Discussion, Conclusions and Recommendations). Subtitles are in bold format Title Caseand left without a prepared flat bottom line. Sub-sub-headings in bold format Sentence case and compiled left flat.

Manuscripts can be written in Indonesian with the maximum number of pages to 20 pages, including figures and tables. Manuscript must be written according to the template of this article in the form of print-ready ( Camera ready ). Articles should be written in a text field size A4 (210 x 297 mm) and with a format of 4 cm left margin, right margin 3 cm, lower margin 3 cm, and the top margin of 3 cm. The manuscript must be written with the font Times New Roman 12 pt font size (unless the article title, author name and title abstract), within two spaces, and the format of the column. Words or foreign terms are written in italics (Italic). Should avoid the use of foreign terms to articles in Indonesian language. New paragraph starting 1 cm from the left border, while the missing spaces between paragraphs between. All numbers written with arabic numerals, except at the beginning of the sentence. Writing unit using the International System of Units (SI). Examples of unit symbols abbreviations: gram (g), liters (L), cubic meters (m 3 ) per cubic meter (m -3 ).

Tables and Figures placed in the group after the text of the referenced tables or figures. Each image must be given the title of the image ( Figure Caption ) on the bottom of the image and numbered in Arabic numerals followed by the title picture in Indonesian and English. Each table should be titled table ( Table Caption ) and numbered in Arabic numerals on the top of the table followed by the title of the table in Indonesian and English.The pictures should be printed clearly warranted (font size, resolution and size of the line to be sure printed clearly). Figures and tables and diagrams / schematics should be placed among the groups corresponding column of text, or if too much is placed in the middle of the page. Tables should not contain vertical lines, while the horizontal lines are allowed but only the essentials only.

4. Special Instructions Content Writing Script Manuscript

TITLE ARTICLE : Article Title should be written briefly and clearly, and must pinpointing issues to be raised, does not allow its diverse interpretations, written entirely in capital letters symmetrically. Title of the article should not contain abbreviations that are not commonly used. The main ideas put forward in advance a new article is followed by other explanation.

INTRODUCTION : Introduction must contain (in order) the general background, previous literature review ( state of the art ) as a basis for claiming a scientific novelty of the article, a statement of scientific novelty, and the research problem or hypothesis. At the end of the preliminary assessment purposes should be written the article. In the scientific article format is not allowed their review of the literature as well as in the research report, but expressed in previous literature review ( state of the art ) to demonstrate the scientific novelty of the article.

DISCUSSION : Discussion scientifically. Write the scientific findings ( scientific finding ) obtained from the results of research that has been done, but must be supported by sufficient data. Scientific findings are referred to here is not the data of the research results. These scientific findings should be explained scientifically include: Does the scientific findings obtained? Why did it happen? Why such a variable trend? All these questions must be explained scientifically, not merely descriptive, if necessary supported by the phenomena of adequate scientific basis. Furthermore, it should be explained also in comparison with the results of other researchers about the same topic. The results of the research and findings must be able to answer the research hypotheses in the introduction.

CONCLUSIONS AND RECOMMENDATIONS : Served briefly by considering the title of the script, the intent and purpose in accordance with the needs of stakeholders.

ACKNOWLEDGEMENTS : Ackowledgements mainly addressed to research funders or donors. Persantunan can also be delivered to the parties that support the implementation of research.

REFERENCES : All references are referred to in the text of the article must be registered at the Bibliography at least 25 titles. Reader that comes from his own writings a maximum of 5 posts. References should contain reference libraries derived from primary sources (scientific journals and amounted to a minimum of 80% of the total bibliography) published 10 (ten) years. Writing in the referral system in the article text and writing a bibliography should use reference management application program, for example: APA, Mendeley, EndNote, or Zotero, or other.

5. Free Writing Equations

Each equation is written centered and numbered columns are written in parentheses and placed at the end of the right margin. Equations should be written using Equation Editor in MS Word or Open Office (Primack, 1983).

6. Free Writing Citations / References In Text Articles

Each fetch data or quoted from other libraries, the writer must write the reference source. References or citations written in the description / text by the author's name and the year (Irwan & Salim, 1998). If the author of more than two, then just write the name of the first author followed by " et al. " (Bezuidenhout et al ., 2009; Roeva, 2012). All referenced in the text must be listed in the References section, and vice versa, all that is written in the Bibliography should be referenced in the text (Wang et al ., 2011).

7. Free Writing Bibliography

Writing Bibliography should use reference management applications such as Mendeley , End Note , Zotero , or other. The format of writing used in the journal Fisheries Policy Indonesia is in accordance with the format APA 6 th Edition ( American Psychological Associati on). Download

Library in the form of magazine / journal: 

Kartamihardja, ES (2009). Management of fish resources bilih ( Mystacoleucus padangensis ) introduction at Lake Toba. J. Kebijak.Perikan.Ind . (2), 87-98.

Library in the form of titles :

Fridman, A. (2008). Plasma Chemistry (p. 978). Cambridge: Cambridge University Press.

Library in the form of Proceedings of the Seminar:

Roeva, O. (2012). Real-World Applications of Genetic Algorithm. In International Conference on Chemical and Materials Engineering (pp. 25-30).Semarang, Indonesia: Department of Chemical Engineering, Diponegoro University.

Library in the form of a dissertation / thesis / theses: 

Istadi, I. (2006). Development of A Hybrid Artificial Neural Networks - Genetic Algorithm for Modelling and Optimization of Dielectric-Barrier Discharge Plasma Reactor. PhD Thesis . Universiti Teknologi Malaysia.

Library in the form of patent: 

Primack, HS (1983). Method of Stabilizing polyvalent Metal Solutions. US Patent No. 4,373,104.

Libraries that form the Handbook: 

Hovmand, S. (1995). Fluidized Bed Drying. In Mujumdar, USA (Ed.) Handbook of Industrial Drying (pp.195-248). 2nd Ed. New York: Marcel Dekker.

8. Instructions Submit Manuscripts Online

Manuscripts should be submitted through one of the following ways (the second way is preferred):

  1. Shipping manuscript preferably with Online Submission System in the E-Journal Portal Journal Indonesian Fisheries Policy (http://ejournal-balitbang.kkp.go.id/index.php/jkpi)
  2. The first author listed as author and / or Reviewers (checking role as Author and / or reviewers) in the " Register " or address: http://ejournal-balitbang.kkp.go.id/index.php/jkpi / user / register
  3. After Writer login as Author, click on " New Submission ". Stages submit article consists of five stages, namely: (1). Start, (2). Upload Submission , (3). Enter Metadata , (4). Upload Supplementary Files , (5). Confirmation
  4. Under Start , select the Journal Section ( Full Article ), check all of the checklist.
  5. In the Upload Submission , please upload a manuscript file in MS Word articles in this section.
  6. In the Enter Metadata , enter data all Writers and their affiliates, followed by the title and abstract, and indexing keywords .
  7. In the Upload Supplementary Files , allowed to upload files supporting data or affidavit or other documents.
  8. On the Confirmation, please click " Finish Submission" if all the information is correct.
  9. If the author difficulties in the process of submission via online system, manuscripts can also be sent via E-mail to email Fisheries Policy Journal Editorial Indonesia (jkpi.puslitbangkan@gmail.com), however this method is not recommended.
  10. Statement letter can be downloaded here.

9. Conclusion

Every article submitted to the Journal editorial office of Indonesian Fisheries Policy must follow the instructions of this writing. If the article is not in accordance with these guidelines, the writing will be restored before explored further.

10. Acknowledgements

Thanks delivered to the Center for Fisheries Research and Development, which has funded the sustainability of this journal.

11. Bibliography

Bekker, JG, Craig, IK, and Pistorius, PC (1999). Modeling and Simulation of Arc Furnace Process. ISIJ International , 39 (1), 23-32.

Bezuidenhout, JJ, Eksteen, JJ, & Bradshaw, SM (2009). Computational fluid dynamic modeling of an electric furnace is used in the smelting of concentrates containing PGM, Minerals Engineering , 22 (11), 995-1006.

Bhaktavatsalam, AK, & Choudhury, R. (1995). Specific Energy Consumption in the Steel Industry . Energy , 20 (12), 1247-1250.

Camdali, U., & Tunc, M. (2006). Steady State Heat Transfer of Ladle Furnace Steel During Production Process. Journal of Iron and Steel Research, International , 13 (3), 18-20.

Fridman, A. (2008). Plasma Chemistry (p. 978). Cambridge: Cambridge University Press.

Hovmand, S. (1995). Fluidized Bed Drying. In Mujumdar, USA (Ed.) Handbook of Industrial Drying (pp.195-248). 2nd Ed. New York: Marcel Dekker.

Istadi, I. (2006). Development of A Hybrid Artificial Neural Networks - Genetic Algorithm for Modelling and Optimization of Dielectric-Barrier Discharge Plasma Reactor. PhD Thesis . Universiti Teknologi Malaysia.

Primack, HS (1983). Method of Stabilizing polyvalent Metal Solutions. US Patent No. 4,373,104.

Roeva, O. (2012). Real-World Applications of Genetic Algorithm. In International Conference on Chemical and Materials Engineering (pp. 25-30).Semarang, Indonesia: Department of Chemical Engineering, Diponegoro University.

Wang, Z., Wang, NH, & Li, T. (2011). Computational analysis of a twin-electrode DC submerged arc furnace for the production of crystal MgO. Journal of Materials Processing Technology , 211 (3), 388-395.

12. Article Processing Fees

Every article submitted to the Journal editorial office of Indonesian Fisheries Policy is free of charge (free - no page charge) processing fee included free articles. Costs borne by the publication of this journal publishers.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in Microsoft Word document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is double-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Reviewhave been followed.

  7. Jumlah tulisan 25 halaman, Kertas A4 (210 mm x 297 mm)

  8. Judul tidak lebih dari 15 kata

  9. Grafik hitam putih, Gambar atau Peta bisa berwarna

  10. Margin kiri 4 cm, margin kanan 3 cm, margin atas 3 cm dan margin bawah 3 cm
  11. Abstrak 150-250 kata (Bahasa Indonesia & Inggris), Kata Kunci 3-5 kata
  12. Daftar Pustaka mengacu "APA" Minimal 25, dengan ketentuan 80% Jurnal, 10 Tahun Terakhir.
 

Copyright Notice

Creative Commons License
Indonesian Fisheries Policy Journal is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License .

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (IDR)

Fast-Track Review: 0.00 (IDR)

Article Publication: 0.00 (IDR)