IMPLEMENTATION OF A WEB-BASED REAL-TIME MONITORING SYSTEM FOR VIBRATION, TEMPERATURE, AND NOISE OF REFRIGERATION MACHINES WITH MICROCONTROL

Muhammad Zakiy Lathif abrori; Bobby Demeianto; Muhammad A. Idrus; Marsono Marsono Marsono; Yasser Arafat; Ade Hermawan; Yani Nurita

doi:10.15578/aj.v7i2.18186

IMPLEMENTATION OF A WEB-BASED REAL-TIME MONITORING SYSTEM FOR VIBRATION, TEMPERATURE, AND NOISE OF REFRIGERATION MACHINES WITH MICROCONTROL

Muhammad Zakiy Lathif abrori, Bobby Demeianto, Muhammad A. Idrus, Marsono Marsono Marsono, Yasser Arafat, Ade Hermawan, Yani Nurita

Abstract

Real-time monitoring of vibration, temperature, and noise in refrigeration machines using microcontrollers is still rarely discussed, although it plays a crucial role in maintaining machine performance and supporting decision-making for predictive maintenance. This research aims to design and implement a microcontroller-based monitoring system capable of measuring and recording machine operational parameters in real-time with adequate accuracy. The system uses an accelerometer sensor for vibration detection, an infrared thermometer for temperature measurement, and an electret microphone for noise monitoring. The data is processed by a microcontroller equipped with an SD card module for storage and a WiFi connection for remote access via the web. The test results show that this device can detect changes in vibration with an Mean Absolute Error value of 0.34 m/s², temperature with a Mean Absolute Percentage Error value of 1.35%, and provides real-time data that can be accessed wirelessly through other devices connected to the WiFi network. The contribution of this research lies in providing a monitoring solution that improves operational efficiency, minimizes the risk of downtime, and supports the optimal management and maintenance of refrigeration machines.

Keywords

Monitoring real time, vibration, temperature, noise, microcontroller, sensor.

Full Text:

PDF

References

Afhrila, R., & Hidayat, R. (2023). Saklar Kontrol Hand Sanitizer Otomatis Menggunakan Jarak Pada Infrared Sensor Obstacle Avoidance. Jurnal Ilmiah Wahana Pendidikan, 9(11), 232–244.

Ahmad Faqih Supriyadin, Edi Kurniawan, & Eddi Eddi. (2024). Sistem Keselamatan Terhadap Kebisingan Di Kamar Mesin Berbasis Mikrokontroler Arduino Uno. Jurnal Teknik Mesin, Industri, Elektro Dan Informatika, 3(2), 53–69. https://doi.org/10.55606/jtmei.v3i2.3755

Akbar, R., & Chusyairi, A. (2021). Rancang Bangun Dispenser Penuangan Air Minum Otomatis Berbasis Arduino Menggunakan Metode Prototype. Aisyah Journal Of Informatics and Electrical Engineering (AJIEE), 3(2), 153–162.

Albianto, M. D. (2023). Internet of Things (IoT) Based Temperature Monitoring System on The Low Voltage Sub-Distribution Panel (LVSDP) Busbar. International Journal of Research in Vocational Studies (IJRVOCAS), 3(2), 45–52.

Analog Devices. (2008). ADXL345: Three-Axis ±2/4/8/16g Digital Accelerometer – Preliminary Technical Data. https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf

Arifin, Z., Muliawati, F., & Irawan, J. (2023). Prototipe Gerbang Presensi Terintegrasi Alat Pemeriksaan Suhu Tubuh Berbasis Mikrokontroler. JuTEkS (Jurnal Teknik Elektro Dan Sains), 10(1), 35–40.

Buwarda, S., Lutfi, L., & Yaqin, M. A. (2023). Monitoring Suhu, Vibrasi dan Arus Motor Induksi 3 Fasa. MUSTEK ANIM HA, 12(02), 137–141.

Dwinanto, B., & Yulianto, B. (2024). Rancang Bangun Repeater Lora Rfm95 Dengan Frekuensi 915 Mhz Berbasis Esp32. Cerdika: Jurnal Ilmiah Indonesia, 4(2), 109–125.

Effendi, H., & Saryadi, R. M. (2023). Perancangan Sistem Deteksi Dan Pengenalan Perintah Suara Menggunakan Modul Esp 32 Dengan Metode Convolutional Neural Network (Cnn). SAINSTECH: JURNAL PENELITIAN DAN PENGKAJIAN SAINS DAN TEKNOLOGI, 33(4).

Farhan, V., Irianto, C. G., Kasim, I., & Sari, T. K. (2023). A Deteksi Kekurangan Pelumas Bearing untuk Mencegah Kerusakan pada Motor Induksi Kompresor Udara. Jetri: Jurnal Ilmiah Teknik Elektro, 153–164.

Generic Manufacturer. (2020). KY-037 Highly Sensitive Microphone Sound Sensor Module -- Technical Specifications. https://components101.com/modules/ky-037-sound-detection-sensor-module

Gumulya, D. (2023). Rancangan Produk Daur Ulang Melalui Metode Circular Design. Jurnal PATRA, 5(1), 7–15. https://doi.org/10.35886/patra.v5i1.480

Hayder Fadhil Jawad, Ali Al-Askery, & Adnan Hussein Ali. (2022). Design and Implementation of a Healthcare Monitoring System Based on LoRa. Journal of Techniques, 4(4), 80–94. https://doi.org/10.51173/jt.v4i4.792

Huda, A. N., Imaduddin, I. R., Iskawanto, H. S., & Putra, R. G. (2020). Perancangan Solar Charge Controler Menggunakan Control Proportional Integral Derivative (PID) Pada Prototype Traffic Light. JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering), 5(2), 9–15.

Karabacak, Y. E., Özmen, N. G., & Gümüşel, L. (2022). Intelligent worm gearbox fault diagnosis under various working conditions using vibration, sound and thermal features. Applied Acoustics, 186, 108463.

Karyatanti, I. D. P., Zulkifli, R. S., Noersena, A., Purnomo, F. R., Dewantara, B. Y., & Wijayanto, A. (2022). Identification Of Ball Bearing Damage On Induction Motors Through Sound Signal Analysis. Journal of Electrical and Electronics Engineering, 15(1), 33–38.

Majid, I. N., & Cahyono, M. R. A. (2022). Rancang Bangun Sistem Pemantauan Parameter Untuk Mendiagnosa Kondisi Mesin Kompresor Sentrifugal Berbasis Web. Jurnal Instrumentasi Dan Teknologi Informasi (JITI), 4(1), 36–46.

Melexis Technologies NV. (2019). MLX90614: Infrared Thermometer Sensor for Contactless Temperature Measurements - Datasheet. https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90614

Nailurrohman, M., Santoso, F., & Baijuri, A. (2024). Rancang Bangun Sistem Smart Key Pada Sepeda Motor Menggunakan Mikrokontroler Esp32 dan Android Via Bluetooth. G-Tech: Jurnal Teknologi Terapan, 8(3), 1759–1768.

Noh, K., & Lee, C. (2021). Development of an Ignition System and Assessment of Engine Performance and Exhaust Characteristics of a Marine Gas Engine. Sustainability, 13(8), 4097. https://doi.org/10.3390/su13084097

Pamungkas, G. S. G., Dewanto, Y., & Sukendar, T. (2023). Rancang Bangun Alat Pendeteksi Kebisingan Suara dan Peringatan Jam Perkuliahan Otomatis. JURNAL TEKNOLOGI INDUSTRI, 12(2).

Rahayu, R. A., Nurhanafi, K., Syahrir, S., & Zarkasi, A. (2024). Aplikasi Sensor Micro Electro Mechanical System (Mems) Accelerometer Berbasis IoT dalam Pengukuran Percepatan Maksimum Getaran Struktur Jembatan. Jurnal Informatika Dan Teknik Elektro Terapan, 12(2).

Rahmawati, Y., Simanjuntak, I. U. V., & Simorangkir, R. B. (2022). Rancang Bangun Purwarupa Sistem Peringatan Pengendara Pelanggar Zebra Cross Berbasis Mikrokontroller ESP-32 CAM. Jambura Journal of Electrical and Electronics Engineering, 4(2), 189–195.

Rizaldi, D. M., Wisaksono, A., Saputra, D. H. R., & Ahfas, A. (2022). IoT-Based Car Monitoring Engine Mounting Design. Procedia of Engineering and Life Science, 2(2). https://doi.org/10.21070/pels.v2i2.1190

Rodrigues, J. V. O., Pedroso, M. P. G., Silva, F. F. B., & Junior, R. G. L. (2021). Performance evaluation of accelerometers ADXL345 and MPU6050 exposed to random vibrational input. Research, Society and Development, 10(15), e286101523082–e286101523082.

Sugandi, B., Satria, M. H., Arif, H., Nelmiawati, N., & Mulyadi, I. H. (2020). Low Cost Wireless ECG Patch Using ESP32. JURNAL INTEGRASI, 12(1), 31–35. https://doi.org/10.30871/ji.v12i1.1764

Susanto, M., Saputra, R., Herlinawati, Savetlana, S., & Alam, S. (2020). Prototype of Sensor Node for Low-Cost Machine Vibration Monitoring System Using Accelerometer Sensor. 2020 IEEE International Conference on Communication, Networks and Satellite (Comnetsat), 222–226. https://doi.org/10.1109/Comnetsat50391.2020.9328973

Tauvana, A., Rachmanu, F., Nulhakim, L., & Mulyani, Y. (2023). Predictive Maintenance Mechanical Looseness Pada Poros Berputar Berbasis Lab View. Ramatekno, 3(1), 1–9.

Triwijaya, S. (2023). Design of Noise Level Measuring Instruments in Railway Facilities. JREEC: Journal of Renewable Energy, Electronics and Control, 3(2), 24–30.

Ulfa, M. A., Dewi, I. A. S. K., & Darmawan, Y. (2023). Peramalan Produksi Pulp Menggunakan ARIMA dan Analisis Daya Saingnya di Pasar Internasional. Jurnal Ekonomi Dan Bisnis Digital (Ekobil), 2(2).

Wang, A., Li, Y., Du, X., & Zhong, C. (2021). Diesel Engine Gearbox Fault Diagnosis Based on Multi-features Extracted from Vibration Signals. IFAC-PapersOnLine, 54(10), 33–38. https://doi.org/10.1016/j.ifacol.2021.10.137

Xu, Y., Tang, X., Feng, G., Wang, D., Ashworth, C., Gu, F., & Ball, A. (2022). Orthogonal on-rotor sensing vibrations for condition monitoring of rotating machines. Journal of Dynamics, Monitoring and Diagnostics, 1(1), 29–36.

DOI: http://dx.doi.org/10.15578/aj.v7i2.18186